Overall cut hydraulic wire rope, wire rope cut off, the wire rope cutter, wire rope cut device 

 Our large supply of rope cut off, you can cut diameter of 30 or 48 of the rope, convenient, quality assurance, welcome customers to inquire. 
 Integral wire rope cut off from other parts of the side seat, seat piston, piston rod, end caps, power, fixed knife block, cylinder shell, pump, lift hand, O-ring, pull the arm and so the composition, the use of hydraulic drive principle, lift the hand up and down tilt, tilt the pump piston driving force protruding cutting, widely used in shipbuilding, mining, loading and other departments. 
 Mining hydraulic nut / mother broken cut, hydraulic nut / mother split, hydraulic wire rope cut 
 Mine broken hydraulic nut cut, broken cut mining hydraulic nuts, hydraulic nuts split, hydraulic nut cleave, Hydraulic Wire Rope Cutter, Hydraulic wire rope cut hydraulic wire rope cutter hydraulic wire rope cutter 


 Parameters QY-30 QY-48 
 Cut the largest diameter wire rope (mm) 30 48 
 The Pistons process ≥ 38 ≥ 55 mm, 
 Maximum shear force T 7.5 16 




 Integral wire rope cut off the technical parameters 

 Parameter model cutting range blade stroke cut off the power of the handle operation force 
 QY-30 ￠ 8-30mm 40mm 7.5T ≤ 25kgf 
 QY-48 ￠ 8-48mm 58mm 20T ≤ 39kgf 


 Separate wire rope cut off the technical parameters 

 Parameter model cutting range of blade travel the maximum cutting force of pressure 
 FJQ-32 ￠ 8-32mm 40mm 16T 63MPa 
 FJQ-52 ￠ 8-52mm 58mm 50T 63MPa 

 Mining hydraulic nut / mother broken cut, hydraulic nut / mother split, hydraulic wire rope cut 
 Mine broken hydraulic nut cut, broken cut mining hydraulic nuts, hydraulic nuts split, hydraulic nut cleave, Hydraulic Wire Rope Cutter, Hydraulic wire rope cut hydraulic wire rope cutter hydraulic wire rope cutter 



 Separate wire rope cut off, integral wire rope cutting, hydraulic wire rope cut 
 Separate wire rope cutter, the main power source (with electric, manual pump may be) working cylinder, slide and cut off the blade several major components, it has a reasonable structure, convenient operation, cut off the fast, labor-saving advantages, especially separation structure, and thus fundamentally to avoid careless operation resulting in the phenomenon of wire rope thrown bombs wounding. The cut off not only cut ￠ 32-52 mm wire rope can cut off the following specifications ￠ 20 mm round bars. The Cutter is a national initiative is widely used in metallurgy, mining, petroleum, bridges and other engineering departments. 
 How to use: 
 1 fuel tank with pump high-pressure hose connected to, and back to the oil bolts tightened. 
 2, the active marketing pull out, turn the slide and then will be to cut the rope into the slot (direct penetration) Shanghao activities sales. 
 3, the tilt the handle up and down the blade forward to cut off work. 
 Forward the work is completed, unscrew the oil return bolt, so that the knife return to prepare the next action. 
 Model rated pressure of the blade stroke cut off the power Dimensions (mm) 
 Of FDG-32-63Mpa 40 mm 16T 600 × 230 × 120 
 Of FDG-52 63Mpa 58 mm 50T 600 × 350 × 35